| Customization: | Available |
|---|---|
| Application: | Construction Wire Mesh, Protecting Mesh |
| Hole Shape: | Diamond |
|
Still deciding? Get samples of US$ 15/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Rib Lath can be used with general traditional bracket systems, and the center distance equivalent to 20mm plywood is sufficient Rib lath can be used in portrait or landscape orientation, but the bracket must be at right angles to the frame. The skeleton must be oriented towards the side intended to receive the poured concrete. Rib lath mesh can be cut on the job site with heavy-duty scissors or a disc grinder. The connecting meshes should be combined with skeleton tile sleeves and tied with a gap of 150mm. The front and rear meshes should have a 150mm re-feeding port and should be well supported. Rib lath formwork can be used with all common support devices and eliminates the need to remove supports. Rib lath formwork can be installed horizontally or vertically to suit various situations. The supports constrain the rib lath formwork shell during pouring. The supports should be at right angles to the rib lath to hold against the rib lath formwork.
|
){kind=link}